Carburetors for Forklifts

Forklift Carburetors - Mixing the air and fuel together in an internal combustion engine is the carburetor. The machine consists of a barrel or an open pipe called a "Pengina" through which air passes into the inlet manifold of the engine. The pipe narrows in section and afterward widens once more. This system is referred to as a "Venturi," it causes the airflow to increase speed in the narrowest part. Below the Venturi is a butterfly valve, which is otherwise referred to as the throttle valve. It works to control the air flow through the carburetor throat and controls the quantity of air/fuel combination the system will deliver, which in turn controls both engine speed and power. The throttle valve is a rotating disc which could be turned end-on to the airflow so as to barely limit the flow or rotated so that it could absolutely block the air flow.

Generally connected to the throttle through a mechanical linkage of joints and rods (sometimes a pneumatic link) to the accelerator pedal on a vehicle or piece of material handling equipment. There are small holes positioned on the narrow section of the Venturi and at several parts where the pressure will be lowered when running full throttle. It is through these openings where fuel is introduced into the air stream. Specifically calibrated orifices, called jets, in the fuel channel are responsible for adjusting fuel flow.

Click to Download the pdf

Forklift Parts

Attachments for Gradall Forklift

Attachments for Gradall Forklifts - Throughout the period when World War II caused a shortage of laborers, the famous Gradall excavator was established in the 1940s as the creation of two brothers Koop and Ray Ferwerda. Partners in a Cleveland, Surprise construction business called Ferwerda-Werba-Ferwerda, the brothers faced a huge predicament when a lot of men left the workforce and...

More

---

Parts for Hydraulic Boom Lifts

Hydraulic Boom Lift Part - Telehandlers or Shooting Forklift Booms Shooting forklift booms may also be known as telescopic booms or telehandlers and are very useful on rough terrains. This particular type of boom could hoist staff to heights of twenty to forty feet. These booms are normally utilized outside on construction sites or within the agricultural industry. Booms Must...

More

---

Parts for Rough Terrain Forklift

Parts for Rough Terrain Forklifts - There are in fact two different classifications of lift trucks within the materials handling market, the industrial model and the rough terrain model. Rough terrain lift trucks first arrived on the marketplace in the 1940's and were primarily utilized on rough roads, perfect for areas where no paved roads were available, like building sites...

More

---

Attachment for Knuckle Boom

Knuckle Boom Attachments - Businesses usually have to carry, transfer, and stock up extremely heavy cargo. Load sizes from 5 to 10 tons which have to be transferred using dependable equipment that could load and support itself. To resolve these issues, very large Boom Trucks were invented so as to do these huge jobs. There are lots of various models...

More

---

Parts for Stacker Forklift

Stacker Forklift Parts - A type of compact forklift, the electric stacker is used to work in smaller areas, making loading and lifting a lot easier on the warehouse worker. Normally wide, but flat objects like tubes, slabs and pallets are transported using this piece of equipment. There are metallic prongs jutting out horizontally from the body of the electrical...

More

---

Crown Forklift Parts

Crown Forklift Part - The Crown company was founded in 1945 by two brothers, Allen A. Dicke and the late Carl H. Dicke. Carl's son and Chairman Emeritus, James F. Dicke, joined the family business later on that same year. Presently, his son, James F. Dicke II, is Chairman and CEO. James F. Dicke III, serves as the company Head...

More

---

Parts for Walkie Stackers

Parts for Walkie Stacker - A pallet stacker is a type of pallet jack that is employed to transport, stack and lift palletized goods that are overly heavy for manual lifting. Its main purpose is to load and unload pallets on trucks, and also transferring pallets to and from a variety of places within a storeroom space or warehouse. For...

More

---

Parts for Gas Forklift

Part for Gas Forklift - In the year 1893, inventor Rudolf Diesel developed the diesel engine. The combustion engine functions by providing the heat of compression in order to burn the fuel and initiate ignition. Then the fuel is injected into the combustion chamber. This design is in contrast to spark ignition engines, like for instance gasoline or petrol engines...

More

---